Filter
Top Products
92
Symptom Cause and countermeasure
The volume
from the MD
WALKMAN is
low.
The sound from
the MD
WALKMAN
drops out/is
distorted, or
noise occurs.
If the system still does not operate properly after performing the above
measures, reset the system as follows:
1 With the system turned on, press NAME EDIT/CHARACTER, 1/ALL and UPPER DISPLAY
at the same time.
2 Press 1/u (power).
“RESET OK!” appears, and the system turns off.
3 Unplug the power cord.
4 Plug the power cord back into the wall outlet.
The system is reset to the factory settings. All the settings you made such as the preset stations,
clock, timer and CD disc titles are cleared and must be set again.
Troubleshooting (continued)
The input level of the selected function is low.
m Adjust the input level (see page 77).
The MD WALKMAN is not set correctly, or is positioned incorrectly.
m Set the Mega Bass function, AVLS function and volume of the MD WALKMAN
(see page 75).
m Remove the MD WALKMAN from on top of the system and place it so that it
does not touch the system.