Filter
Top Products
27
Listening to a CD/MD
2 Press PLAY MODE repeatedly until
“PROGRAM” appears.
3 Press CD/MD 1 – 5 (or CD/MD
D.SKIP on the remote) to select the
desired CD or MD.
CD:
MD:
To program all of the tracks on a single
CD or MD at once, proceed to step 5
with “AL” displayed.
4 Turn MULTI JOG until the desired
track number appears.
Or press CD/MD = or + on the
remote.
The playing time of the selected track
flashes.
CD tray number
Selected CD and
track numbers
MD slot number
CD:
Total playing timeLast track
Total playing timeLast track
Selected MD and
track numbers
Playing time of
selected track
MD:
5 Press ENTER/YES.
The track is programmed. The number
of the track in the programmed sequence
(the Step number) appears, followed by
the last programmed track number and
the total playing time of all the
programmed tracks.
If you made a mistake, you can clear the
last programmed track from the
program by pressing CLEAR.
CD:
MD:
6 To program additional tracks,
repeat steps 3 to 5.
7 Press ·P for the CD or MD (or
CD/MD · on the remote).
All the tracks play in the order you
selected.
Playing time of
selected track
continued