55
System Configuration ~ Telco Setup
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
The XAP 400 has a built-in telephone interface that may be configured to meet the
requirements of different installations. The default settings will work for most
installations.
To configure telco settings
1. Click the Telco Config button on the XAP 400 Flow Screen.
2. The Telco Configuration window opens. Adjust settings as necessary. Refer to
the table on the following page for a description of configurable settings.
3. Click Close when you have finished making changes to save the settings and
close the window.
Telco Setup
Figure 3.59. Telco
Config icon on the
Flow Screen
Figure 3.60. Telco Configuration window for XAP 400
The telephone line or PBX
system must have
provisions for loop drop,
loop reversal, or call progress
signals in order for the auto
disconnect feature to function.
✍