Filter
Top Products
Appendices ~ Appendix E: Serial Commands
106
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Command Function
MLINE Selects/reports coarse gain adjustments on
Inputs 1–4
MMAX Selects/reports max # of mics for each mic
group
MPASS Sets passcode setting when using modem
mode
MTRX Selects/reports matrix routing of an in. to out.
MTRXLVL Selects/reports matrix level at the cross point
MUTE Sets/reports mute status
NCD Selects/reports noise cancellation amount for
each mic channel
NCSEL Selects/reports noise cancellation on/off for
each mic channel
NLP Selects/reports NLP for each mic channel
NOM Selects/reports NOM setting on output
channels
NULL Renulls the XAP 400 to the telephone line
OFFA Selects/reports off attenuation mode for
inputs 1–4
PAA Selects PA adapt mode for specified input
PP Selects/reports phantom power setting
PRESET Executes preset or report last executed preset
PRGSTRING Sets/reports a programmed string
RAMP Start/stops the gain ramp for an input, output,
or assignable processing block
REDIAL Redials the last number
REFSEL Selects/reports PA adapt mode for mic
outputs
REFSET Selects/reports the output the reference channel
tracks
Command Function
RING Indicates a ringing line (reportable only)
RINGER Sets the audible ringer for a telco channel
RINGERLVL Sets the audible ring indication level
RXBOOST Sets the receive boost at 0,3,6,9, or 12dB
RXBSTEN Enables/disables receive boost
RXRD Sets the RX reduction for the telco channel
SERECHO Selects/reports the serial echo of the RS-232
SERMODE Selects/reports the serial mode of the RS-232
SIGGEN Selects/reports signal generator activation
SIGTOUT Sets the signal generator time out for the unit
SLVL Selects/reports mic auto level setting
SPEEDDIAL Dials one of ten numbers on the telco channel
STOREDIAL Saves a number in speed dial or reports the
current value
STRING Executes a string for the RS-232 port
SFTYMUTE Selects/reports the state of the safety mute.
When on, the safety mute holds all outputs in a
muted state.
TAMODE Sets the telco adapt mode for the telco
channel
TE Sets the telco enable for the telco channel
TERL Reports the telco echo return loss (read only)
TERLE Reports the telco echo return loss
enhancement (read only)
TOUT Selects/reports the title screen inactivity time
out
UID Reports unit ID (read only)
VER Reports unit version (read only)