ClearOne comm XAP 400 Stereo System User Manual


 
System Configuration ~ Installing G-Ware
22
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Creating floppy disk copies
Depending upon the computer equipment you have available, you might need to
install G-Ware software from floppy disks rather than the included CD. To do this, a
Disk Copy program is provided in G-Ware that allows you to transfer G-Ware to
floppy disks. You will need a PC with a CD-ROM drive to make the transfer. After
installing G-Ware on the CD-ROM-equipped computer, you can access the Disk Copy
program in the following way:
From the Windows Start menu, select Programs, ClearOne G-Ware, and
then Create Install Floppy Disks. Follow the onscreen prompts to complete
creation of the floppy disks.
To install G-Ware
1. Boot the PC to the Windows operating system. Ensure that all other
programs or applications are closed. Insert the Audio and Video Products
CD into the CD-ROM drive.
If the Autorun feature is enabled on the PC, the ClearOne Welcome window
opens. Click the Software tab and select G-Ware.
If the Autorun window does not open, open the Windows Start menu and
choose Run. Type “<drive>:\\gentner.exe” where <drive> is the letter of
the CD-ROM drive (e.g., D:\\gentner.exe).
2. At the G-Ware window, click Install G-Ware near the bottom of the window.
3. The InstallShield Wizard opens, and guides you through the Welcome and
License Agreement windows. At the Choose Destination Location window,
choose the directory where G-Ware will be installed. We recommend that
you use the default directory.
4. Click Next or Yes to move to proceed through the windows that follow or
No or Cancel to end the installation process.
5. Follow the onscreen instructions. You must restart your computer once
installation is complete.
The G-Ware Program Folder is now added to your Start menu. You can start
G-Ware through the Start menu or by double-clicking the desktop icon.
Installing G-Ware
To select an alternate
destination directory, click
Browse and use the Choose
Directory window to find the desired
location. Click OK to return to the
previous window.
You can also access the
Disk Copy program from
the G-Ware install menu
which is located on the AV Products
CD (exefiles\gware\setup.exe).
Figure 3.1. Desktop icon