Appendices ~ Appendix E: Serial Commands
114
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
DELAYSEL - Delay Select
This command selects/reports the delay activation of an assignable processing
channel.
Command form: DEVICE
DELAYSEL
<Channel> [Value]
Argument details
Name Description
Device 0–7 or * to select all units
DELAYSEL Command form
Channel A–D (select processing channel)
Value 0 = Off, 1 = On, 2 = Toggle, Null to return current state
Example:
#74 DELAYSEL A 1
On XAP 400 unit 4 (
#74
) the delay
(
DELAYSEL
) within processing channel
A
is enabled (
1
).
DFLTM - Default Meter
This command selects/reports the setting of the default meter.
Command form: DEVICE
DFLTM
[Channel] [Group] [Position]
Argument details
Name Description
Device 0–7 or * to select all units
DFLTM Command form
Channel 1–8
Group I = Inputs, O = Outputs, M = Mic Inputs, L= Line Inputs
Position I, A, N, G, as applicable for group
(see Meter Type definitions, page 104)
Example:
#75 DFLTM 8 O A
On XAP 400 unit 5 (
#75
), the default meter
(
DFLTM
) is set to output (
O
)
8
after the gain adjustment (
A
).
DIAL – DTMF Dialing
This command dials a DTMF sequence or reports back the last sequence dialed.
Command form: DEVICE
DIAL
<Channel> [Number]
Argument details
Name Description
Device 0–7 or * to select all units
DIAL Command form
Channel See Group and Channels, page 103
Number 1 – 40 Chars of 0–9, A–D, *, #, and , (comma)
Null to return last number dialed
Example:
#70 DIAL 1 1,8002835936
XAP 400 unit 0 (
#70
) dials (
DIAL
) on
channel
1
the number
18002835936
.