Filter
Top Products
Inputs 5–8
The XAP 400 supports 4 line level only inputs for auxiliary audio sources such as
video codecs and CD players. To open the Inputs 5–8 configuration window, click the
Inputs 5–8 button on the Flow Screen. The In 5–8 button on the Matrix Screen will
also open this window. These non-gated inputs are balanced. The nominal input level
is 0dBu.
To select an input channel, click a blank area in the input pane. If you click
on the input label, a secondary window will open allowing you to rename the input.
The background color for the selected input channel will be light gray. The
configurable properties of these inputs are defined in this section.
Mute
Mute mutes the input channel. The light on the button illuminates red when Mute is
activated. Default is off (unmuted).
AGC
AGC opens the AGC window. The AGC window has the same parameters as the
AGC/SL window with the exception of Enable Speech Leveler. See page 32. The
button light illuminates green when AGC is enabled.
System Configuration ~ Inputs and Outputs
44
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Figure 3.46. Input 5-8 Configuration window