Filter
Top Products
Appendices ~ Appendix E: Serial Commands
120
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
GHOLD- Gate Hold Time Adjust
This command selects/reports the setting of hold time.
Command form: DEVICE
GHOLD
<Channel> [Value]
Argument details
Name Description Units
Device 0–7 or * to select all units
GHOLD Command form
Channel See Groups and Channels, page 103
Value 0.10-8.00 S
Null to return the current hold time
Example:
#70 GHOLD 1 .3
On XAP 400 unit 0 (
#70
), the hold time (
GHOLD
)
for mic channel
1
is 300ms (
.3
).
GMODE - Gating Mode
This command selects/reports the setting of gating mode.
Command form: DEVICE
GMODE
<Channel> [Value]
Argument details
Name Description
Device 0–7 or * to select all units
GMODE Command form
Channel 1–4 (select mic input)
Value 1 = auto, 2 = manual on, 3 = manual off, Null= current mode
Example:
#75 GMODE 1 2
On XAP 400 unit 5 (
#75
), mic channel
1
is set to a
gating mode (
GMODE
) if manual on (
2
).
GOVER - Gating Override
This command selects/reports the setting of gating override.
Command form: DEVICE
GOVER
<Channel> [Value]
Argument details
Name Description
Device 0–7 or * to select all units
GOVER Command form
Channel 1–4 (select mic input)
Value 0 = Off, 1 = On, 2 = Toggle, Null = current mode
Example:
#76 GOVER 1 0
On XAP 400 unit 6 (
#76
), the gating override
(
GOVER
) on mic channel
1
is set to off (
0
).