ClearOne comm XAP 400 Stereo System User Manual


 
53
System Configuration ~ Processing
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Refer to the figure above. Note that as you create filters across several
processing channels, you can observe their crossover points and general shape of
the frequency response. In this case, several Linkwitz-Riley filters are being
created across three processing channels to establish a balanced frequency
response from low-frequency, midrange, and high-frequency transducers.
Delay
Click Delay to open the Delay configuration window. Delay calibrates the amount of
signal delay introduced, based on the length (the distance between the source and
audience) and temperature you enter.
For example, different speaker drivers within a speaker enclosure might be
located different distances from the listening area because of design constraints
within the box. You can set up to 250ms of delay.
Figure 3.56. Low/Mid/High Loudspeaker Driver configuration
Figure 3.57. Delay window
If you don’t want delay
added to the signal, select
the Bypass Delay box.
The Calculated Delay
reading reflects any
changes you make in the
distance and temperature fields.