Polycom SIP 3.1 Speaker System User Manual


 
Configuring Your System
4 - 13
Configuration changes can performed centrally at the boot server or locally:
Microphone Mute
A microphone mute feature is provided. When activated, visual feedback is
provided. This is a local function and cannot be overridden by the network.
There are no related configuration changes.
Soft Key Activated User Interface
The user interface makes extensive use of intuitive, context-sensitive soft key
menus. The soft key function is shown above the key on the graphic display.
There are no related configuration changes.
Speed Dial
Entries in the local directory can be linked to the speed dial system. The speed
dial system allows calls to be placed quickly from dedicated keys as well as
from a speed dial menu.
For SoundPoint IP 320/330 desktop phones and SoundStation IP 6000 and
7000 conference phones, the speed dial index range is 1 to 99. For all other
SoundPoint IP and SoundStation IP phones, the range is 1 to 9999.
If Presence watching is enabled for speed dial entries, their status will be
shown on the idle display (if the SIP server supports this feature). For more
information, refer to Presence on page 4-60.
Central
(boot server)
Configuration file:
sip.cfg
Specify impossible match behavior, trailing # behavior, digit map
matching strings, and time out value.
For more information, refer to Dial Plan <dialplan/> on page A-17.
Configuration file:
phone1.cfg
Specify per-registration impossible match behavior, trailing #
behavior, digit map matching strings, and time out values that
override those in sip.cfg.
For more information, refer to Dial Plan <dialplan/> on page
A-116.
Local Web Server
(if enabled)
Specify impossible match behavior, trailing # behavior, digit map
matching strings, and time out value.
Navigate to: http://<phoneIPAddress>/appConf.htm#ls
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will permanently
override global settings unless deleted through the Reset Local
Config menu selection and the <Ethernet address>-phone.cfg is
removed from the boot server.