Filter
Top Products
Administrator’s Guide SoundPoint IP / SoundStation IP
C - 6
2. Manually reboot the phone so that it will download the new key. The
phone will automatically reboot a second time to use the new key.
At this point, the phone expects all encrypted configuration files on the
boot server to use the new key and it will continue to reboot until this is
the case. The files on the server must be updated to the new key or they
must be made available in unencrypted format. Updating to the new key
requires decrypting the file with the old key, then encrypting it with the
new key.
Note that configuration files, contact directory files and configuration
override files may all need to be updated if they were already encrypted.
In the case of configuration override files, they can be deleted from the
boot server so that the phone will replace them when it successfully boots.
Adding a Background Logo
This section provides instructions on how to add a background logo to all
SoundPoint IP phones in your organization. You must be running at least
BootROM 2.x.x and SIP 1.x.x. One bitmap file is required for each model, but
SoundPoint IP 301 phones do not support bitmap logos.
Logos smaller than described in the table above are acceptable, but larger
logos may be truncated or interfere with other areas of the user interface.
Model Width Height Color Depth
IP 301 n/a n/a n/a
IP 320/330 102 23 monochrome
IP 430 94 23 monochrome
IP 501 114 51 2-bit grayscale or
monochrome
IP 600/601 209 109 2-bit grayscale or
monochrome
IP 550/560/650 209 109 4-bit grayscale or
monochrome
IP 670 209 109 12-bit color
IP 4000 150 33 monochrome
IP 6000 150 33 32-bit grayscale or
monochrome
IP 7000 255 128 32-bit grayscale or
monochrome