Polycom SIP 3.1 Speaker System User Manual


 
Administrator’s Guide SoundPoint IP / SoundStation IP
A - 32
This configuration attribute is defined as follows:
This attribute also includes:
Patterns <pat/>
Ring type <rt/>
Patterns <pat/>
Patterns use a simple script language that allows different chord sets or wave
files to be strung together with periods of silence. The script language uses the
following instructions:
Attribute
Permitted
Values Default Interpretation
se.stutterOnVoiceMail 0, 1 1 If set to 1, stuttered dial tone is used in place of
normal dial tone to indicate that one or more
messages (voice mail) are waiting at the message
center.
se.appLocalEnabled 0, 1 1 If set to 1, local user interface sound effects such
as confirmation/error tones, will be enabled.
Instruction Meaning Example
sampled (n) Play sampled audio file
n
se.pat.callProg.x.inst.y.type
=”sampled” (sampled audio
file instruction type)
se.pat.callProg.x.inst.y.value
=”3” (specifies sampled
audio file 3)
chord (n, d) Play chord set n (d is
optional and allows the
chord set ON duration to
be overridden to d
milliseconds)
se.pat.callProg.x.inst.y.type
= “chord” (chord set
instruction type)
se.pat.callProg.x.inst.y.value
= “3” (specifies call
progress chord set 3)
se.pat.callProg.x.inst.y.param
= “2000” (override ON
duration of chord set to 2000 milliseconds)
silence (d) Play silence for d
milliseconds (Rx audio
is not muted)
se.pat.callProg.x.inst.y.type
= “silence” (silence
instruction type)
se.pat.callProg.x.inst.y.value
= “300” (specifies silence is
to last 300 milliseconds)
branch (n) Advance n instructions
and execute that
instruction (n must be
negative and must not
branch beyond the first
instruction)
se.pat.callProg.x.inst.y.type
= “branch” (branch
instruction type)
se.pat.callProg.x.inst.y.value
= “-5” (step back 5
instructions and execute that instruction)