Filter
Top Products
Configuration Files
A - 59
Network Monitoring <netMon/>
This configuration attribute is defined as follows:
Time Synchronization <sntp/>
The following table describes the parameters used to set up time
synchronization and daylight savings time. The defaults shown will enable
daylight savings time (DST) for North America.
Daylight savings defaults:
• Do not use fixed day, use first or last day of week in the month.
• Start DST on the second Sunday in March at 2 am.
• Stop DST on the first Sunday in November at 2 am.
Polycom recommends that you do not change these values.
Attribute
Permitted
Values
Default
tcpIpApp.netMon.enabled 0, 1 1
tcpIpApp.netMon.period 1 to 86400 30
Attribute
Permitted
Values Default Interpretation
tcpIpApp.sntp.resyncPeriod positive
integer
86400 (24
hours)
Time in seconds between
Simple Network Time
Protocol (SNTP) re-syncs.
tcpIpApp.sntp.address valid host
name or IP
address
clock Address of the SNTP
server.