Filter
Top Products
Administrator’s Guide SoundPoint IP / SoundStation IP
A - 42
Volume Persistence <volume/>
The user’s selection of the receive volume during a call can be remembered
between calls. This can be configured per termination (handset, headset and
hands-free/chassis). In some countries regulations exist which dictate that
receive volume should be reset to nominal at the start of each call on handset
and headset.
Gains <gain/>
The default gain settings have been carefully adjusted to comply with the
TIA-810-A digital telephony standard.
Attribute
Permitted
Values Default Interpretation
voice.volume.persist.handset 0, 1 0 If set to 1, the receive volume will be
remembered between calls.
If set to 0, the receive volume will be reset
to nominal at the start of each call.
voice.volume.persist.headset 0, 1 0
voice.volume.persist.handsfree 0, 1 1
Polycom recommends that you do not change these values.
Attribute Default
voice.gain.rx.analog.handset 0
voice.gain.rx.analog.headset 0
voice.gain.rx.analog.chassis 0
voice.gain.rx.analog.chassis.IP_300 -6
voice.gain.rx.analog.chassis.IP_330 0
voice.gain.rx.analog.chassis.IP_430 0
voice.gain.rx.analog.chassis.IP_601 6
voice.gain.rx.analog.chassis.IP_650 0
voice.gain.rx.analog.chassis.IP_6000 0
voice.gain.rx.analog.chassis.IP_7000 0
voice.gain.rx.analog.ringer 0
voice.gain.rx.analog.ringer.IP_300 -6
voice.gain.rx.analog.ringer.IP_330 0