Setting up Your System
3 - 17
c Edit the CONFIG_FILES attribute of the <Ethernet address>.cfg files
so that it references the appropriate sipXXXX.cfg file.
For example, replace the reference to sip.cfg with sip650.cfg.
d Edit the LOG_FILE_DIRECTORY attribute of the <Ethernet
address>.cfg files so that it points to the log file directory.
e Edit the CONTACT_DIRECTORY attribute of the <Ethernet
address>.cfg files so that it points to the organization’s contact
directory.
4. Reboot the phones by pressing the reboot multiple key combination.
For more information, refer to Multiple Key Combinations on page C-10.
The bootROM and SIP application modify the APPLICATION
APP_FILE_PATH attribute of the <Ethernet address>.cfg files so that it
references the appropriate sip.ld files.
For example, the reference to sip.ld is changed to 2345-11605-001.sip.ld to
boot the SoundPoint IP 601 image.
5. Monitor the boot server event log and the uploaded event log files (if
permitted).
Ensure that the configuration process completed correctly. All
configuration files used by the boot server are logged.
You can now instruct your users to start making calls.
Note
At this point, the phone sends a DHCP Discover packet to the DHCP server. This is
found in the Bootstrap Protocol/option "Vendor Class Identifier" section of the
packet and includes the phone’s part number and the bootROM version.
For example, a SoundPoint IP 650 might send the following information:
5EL@
DC?5cSc52*46*(9N7*<u6=pPolycomSoundPointIP-SPIP_6502345-12600-001,1B
R/4.0.0.0155/23-May-07 13:35BR/4.0.0.0155/23-May-07 13:35
For more information, refer to Parsing Vendor ID Information on page C-24.