Filter
Top Products
Configuration Files
A - 67
Shared Calls <shared/>
This configuration attribute is defined as follows:
Hold, Local Reminder <hold/><localReminder/>
This configuration attribute is defined as follows:
Attribute
Permitted
Values Default Interpretation
call.shared.disableDivert 0, 1 1 If set to 1, disable diversion feature for shared
lines.
Note: This feature is disabled on most call
servers.
call.shared.seizeFailReorder 0, 1 1 If set to 1, play re-order tone locally on shared
line seize failure.
call.shared.oneTouchResume 0, 1 0 If set to 1, when a shared line has a call on hold
the remote user can press that line and resume
the call. If more than one call is on hold on the
line then the first one will be selected and
resumed automatically.
If set to 0, pressing the shared line will bring up
a list of the calls on that line and the user can
select which call the next action should be
applied to.
Note: This parameter affects the SoundStation
IP 4000, 6000, and 7000 phones. For other
phones a quick press and release of the line
key will resume a call whereas pressing and
holding down the line key will show a list of calls
on that line.
call.shared.exposeAutoHolds 0, 1 0 If set to 1, on a shared line, when setting up a
conference, a re-INVITE will be sent to the
server.
If set to 0, no re-INVITE will be sent to the
server.
Attribute
Permitted
Values
Default Interpretation
call.hold.localReminder.enabled 0, 1 0 If set to 1, periodically notify the local
user that calls have been on hold for
an extended period of time.
call.hold.localReminder.period non-negative
integer
60 Time in seconds between subsequent
reminders.
call.hold.localReminder.startDelay non-negative
integer
90 Time in seconds to wait before the
initial reminder.