Administrator’s Guide SoundPoint IP / SoundStation IP
3 - 6
Main Menu
The following configuration parameters can be modified on the main setup
menu:
Name Possible Values Description
DHCP Client Enabled, Disabled If enabled, DHCP will be used to obtain the parameters
discussed in DHCP or Manual TCP/IP Setup on page
3-2.
DHCP Menu Refer to DHCP Menu on page 3-7.
Note: Disabled when DHCP client is disabled.
Phone IP Address dotted-decimal IP address Phone’s IP address.
Note: Disabled when DHCP client is enabled.
Subnet Mask dotted-decimal subnet
mask
Phone’s subnet mask.
Note: Disabled when DHCP client is enabled.
IP Gateway dotted-decimal IP address Phone’s default router.
Server Menu Refer to Server Menu on page 3-9.
SNTP Address dotted-decimal IP address
OR
domain name string
Simple Network Time Protocol (SNTP) server from
which the phone will obtain the current time.
GMT Offset -13 through +12 Offset of the local time zone from Greenwich Mean
Time (GMT) in half hour increments.
DNS Server dotted-decimal IP address Primary server to which the phone directs Domain
Name System (DNS) queries.
DNS Alternate Server dotted-decimal IP address Secondary server to which the phone directs Domain
Name System queries.
DNS Domain domain name string Phone’s DNS domain.
Ethernet Refer to Ethernet Menu on page 3-11.
EM Power Enabled, Disabled This parameter is relevant if the phone gets Power over
Ethernet (PoE). If enabled, the phone will set power
requirements in CDP to 12W so that up to three
Expansion Modules (EM) can be powered. If disabled,
the phone will set power requirements in CDP to 5W
which means no Expansion Modules can be powered (it
will not work).
Syslog Refer to Syslog Menu on page 3-11.