Filter
Top Products
97
Advanced Operation
2
Select the ZONE2 mode using the AMP
button.
3
Press and hold the USER MODE button until
the “USER 1 (2 or 3) MEMORY” is appears
on the ZONE2 monitor.
USER MODE function of ZONE2
• The AVR-5805CI is equipped with a function for storing the
input source, auto surround mode and input mode settings
selected for the MAIN ZONE and ZONE2 in the memory so
they can be used whenever desired.
• For ZONE2, three patterns of settings can be stored in the
memory using the USER MODE 1, 2 and 3 buttons on the
Remote control unit.
• See page 60 for a description of the MAIN ZONE’s “USER
MODE” function.
1
Set the following to the desired status:
q ZONE2 input source
w ZONE2 auto surround mode
e ZONE2 input mode
2 Storing the settings in the memory
1
Select the ZONE2 mode using the AMP
button.
2
Press the USER MODE button at which the
settings you want to call out are stored.
2 Calling the settings out
1
Select the ZONE2 mode using the AMP
button.
2
Select the surround mode for each input
channel.
ZONE2 Surround
• When ZONE2 is used with a 5.1 or 7.1 channel system,
various surround modes can be selected according to the
program source being played.
• The desired sound field can be achieved by adjusting the
parameters for the various surround modes.
(Remote control unit)
The surround mode switches in the following order
each time the DSP SIMULATION button is pressed.
WIDE SCREEN
JAZZ CLUB
SUPER STADIUM
ROCK ARENA
MATRIX
VIRTUAL
VIDEO GAME
CLASSIC CONCERT
MONO MOVIE
4
Press the CURSOR
DD
or
HH
button to select the
various surround parameters.
6
Press the ENTER or SURROUND PARAMETER
button to complete the setting.
5
Press the CURSOR
FF
or
GG
button to adjust the
parameters setting.
See pages 49, 54 ~ 58, 61 for a description of the
features of the various surround modes.
The following surround modes can be selected in
ZONE2: STEREO, STANDARD (DOLBY/DTS
SURROUND), 5/7CH STEREO, WIDE SCREEN, SUPER
STADIUM, ROCK ARENA, JAZZ CLUB, CLASSIC
CONCERT, MONO MOVIE, VIDEO GAME, MATRIX
and VIRTUAL.
3
Press the SURROUND PARAMETER button.
• The surround parameter menu appears.
q STANDARD (Dolby
Digital/DTS Surround)
mode.
w DSP surround
simulation mode.
(Remote control unit)
(Remote control unit)
e STEREO mode.
r 5CH/7CH STEREO
mode.
(Remote control unit)