Filter
Top Products
63
Basic Operation
4
Press the CURSOR
GG
button to select “Tone
Defeat OFF”.
5
Press the CURSOR
DD
or
HH
button to select
“Bass” or “Treble”.
6
Press the CURSOR
FF
or
GG
button to set the
level.
To increase the bass or treble:
The bass or treble sound can be increased to up to +6
dB in steps of 1 dB.
To decrease the bass or treble:
The bass or treble sound can be decreased up to –6 dB
in steps of 1 dB.
8
Press the ENTER or SURROUND PARAMETER
button to complete the setting.
7
Press the ENTER button.
• The surround parameter menu reappears.
2 Adjusting the tone from the main unit
1
Press the TONE CONTROL button.
The tone switches as follows each time the button is
pressed.
BASS (ALL)
F-TREBLE (front)
TREBLE (ALL) F-BASS (front)
C-BASS (center)C-TREBLE (center)
S B-TREBLE
(surround B)
SA-TREBLE
(surround A)
SA-BASS
(surround A)
S B-BASS
(surround B)
SW-BASS
(subwoofer)
SB-BASS
(surround back)
SB-TREBLE
(surround back)
2
Press the CURSOR
FF
or
GG
button to set the
level.
To increase the bass or treble:
The bass or treble sound can be increased to up to +6
dB in steps of 1 dB.
To decrease the bass or treble:
The bass or treble sound can be decreased up to –6 dB
in steps of 1 dB.
2 Tone defeat mode
• If you do not want the bass and treble to be adjusted, turn
on the tone defeat mode.
Press the TONE DEFEAT button to turn on the
“Tone Defeat” mode.
The signals do not pass through the bass and treble
adjustment circuits, providing higher quality sound.