Filter
Top Products
56
Basic Operation
Dolby Pro Logic
II
x (Pro Logic
II
) mode
•To play in the PLIIx mode, set “Sp.Back” at the Speaker
Configuration setting to “1spkr” or “2spkrs”.
•To play in the PL
IIx mode, set “Surround Back” at the Power
Amp Assign setting.
• This mode is optimal for playing program sources recorded
in Dolby Surround.
1
Press the STANDARD button to select “Dolby
Pro Logic IIx” mode.
• The Dolby Pro Logic indicator
lights.
The mode switches as shown
below each time the STANDARD
button is pressed.
lights
DTS NEO:6DOLBY PLIIx
3
Press the SURROUND PARAMETER button.
• The surround parameter menu appears.
2
Play a program source.
For operating instructions, refer to the manuals of the
respective components.
4
Press the CURSOR
FF
or
GG
button to select the
play mode.
When the “SB CH OUT” parameter is set to “ON”.
(Set “SP.Back” at the System Setup to “1spkr” or
“2spkrs”).
SURROUND PARAMETER
STANDARD
ENTER MUSIC
CINEMA
GAME
CURSOR
CURSOR
MUSIC
SURROUND
PARAMETER
ENTER
CINEMA
STANDARD
(Pro Logic II Cinema mode)
(Pro Logic
II Music mode)
(Pro Logic II Game mode)
When the “SB CH OUT” parameter is set to “OFF”.
(Set “SP.Back” at the System Setup to “None”).
Display
MODE: PL G
*Surr Parameter
MODE: PL C
*Surr Parameter
MODE: PL M
*Surr Parameter
*Surr Parameter
MODE: DOLBY PL
(Dolby Pro Logic mode)
MODE: PL x C
*Surr Parameter
MODE: PL x M
*Surr Parameter
MODE: PL x G
*Surr Parameter
(Pro Logic IIx Cinema mode)
(Pro Logic
IIx Music mode)
(Pro Logic
IIx Game mode)
Display