Denon AVR-5805CI Stereo System User Manual


 
135
Advanced Setup – Part 1
Setting the Trigger Out
Four 12 V DC Trigger Outputs on the rear panel can be used
to control other devices with compatible trigger inputs, such
as motorized screens, motorized screen masking, motorized
drapes, and other trigger-controlled devices.
Set the DC output supplied from the trigger out jacks for the
various input sources to “ON” or “OFF”.
1
Press the CURSOR
DD
or
HH
button to select
“Trigger Out” at the “Option Setup” menu,
then press the
ENTER button.
The “Trigger Out” screen appears.
2
Press the CURSOR
DD
or
HH
button to select the
trigger out terminal you want to set, then press
the
ENTER button.
•Switch to the setting screen.
Example: When “Trigger Out 1” is selected
3
Press the CURSOR
FF
or
GG
button to select the
zone (MAIN ZONE, ZONE2, ZONE3 and
ZONE4).
The power supplied from the trigger out terminal turns
on and off when the power for the set zone is turned
on and off.
4
Press the CURSOR
DD
or
HH
button to select the
input source, then press the
CURSOR
FF
or
GG
button to select “ON” or “OFF”.
If “MAIN” was selected at step 3:
Press the
CURSOR
DD
or
HH
button to select the
surround mode, then press the
CURSOR
FF
or
GG
button to select “ON” or “OFF”.
5
ON:
If “ON” is selected when an input source set to
“ON” is selected, the power supplied from the
trigger out terminal turns on.
OFF:
If “OFF” is selected when an input source set to
“ON” is selected, the power supplied from the
trigger out terminal turns off.
6
Press the ENTER button.
The “Trigger Out” screen reappears.
Use the same procedure to make the settings for
Trigger Out 2, 3, 4.
Press the CURSOR
DD
or
HH
button to select
“Exit”, then press the
ENTER button.
The “Option Setup” menu reappears.
7
When “Default Yes” is selected, then press the
CURSOR
FF
button to reset to the default values.
ON:
When that input source is selected, the power
supplied from the trigger out terminal turns on.
OFF:
When that input source is selected, the power
supplied from the trigger out terminal turns off.