Filter
Top Products
Advanced Operation
94
4
Select the input mode. (only ZONE2 mode):
Press the
INPUT MODE button to switch to the
input.
Remote control unit operations during
multi-source playback
1
Select the zone which you want to operate
pressing the
AMP buttons.
2
Press the ON button to turn on the Zone power.
• The multi zone power indicator light.
Press the OFF button to turn off the zone power.
The multi zone power indicator on main unit is off.
AUTO ANALOG
5
The volume of the outputs of the different
zones can be adjusted with the
VOLUME
button on the remote control unit.
The output level can be controlled only if the zone
volume level is set “variable” at “Volume Control” in
the “System Setup Menu” ( page 134).
Default volume setting
ZONE2 : –40 dB
ZONE3 : –40 dB
ZONE4 : –40 dB
The Zone volume can be adjusted within the range of
–80 to 18 dB, in steps of 1 dB.
However, when using with ZONE2 set to multi-channel
(5.1 or 7.1 channel), the ZONE2 volume can be
adjusted in steps of 0.5 dB ( page 126 ~ 128).
• The MUTE button can be operated in the same way as for the
MAIN ZONE ( page 45).
• In the ZONE2 mode, the VIDEO SELECT and ON SCREEN
buttons can be operated in the same way as for the MAIN
ZONE ( page 45, 46).
Multi zone power indicators
AMP
ON/OFF
MUTE
VOLUME
ON SCREEN
INPUT MODE
VIDEO SELET
SYSTEM SETUP
CURSOR
TEST TONE
CH SEL/ENTER
FUNCTION
AMP
ON/OFF
FUNCTION
MUTE
VOLUME
3
Press the FUNCTION button to select the input
function you wish to operate.
(ZONE2)
(ZONE3/4)