Filter
Top Products
76
Basic Operation
2 Network settings
When using a broadband router (DHCP function), the
network settings are made automatically, so there is no
need to make the settings from the setup menu.
If the broadband router’s DHCP function is turned off, make
the “Network Setup” ( page 138, 139).
• The required system connections and settings must be
made in order to listen to Internet radio.
“Update?” appears on the display when connecting to an
Internet radio station for the first time.
Listening to Internet radio
1
Either turn the FUNCTION knob or press the
AUX button to select “NetAudio” (AMPmode).
• The “Network Audio” menu appears.
2
Press the CURSOR
DD
or
HH
button to select
“Internet Radio”, then press the
ENTER or
CURSOR
GG
button.
• The initial screen when not connected to the Internet
is displayed.
(Remote control unit in the AMP mode)(Main unit)
CURSOR
AUX
MEMORY
MEMORY BLOCK
NUMBER
ENTER
(AMP mode)
During playback, press the ENTER button once to
pause playback, then press ENTER button again to
resume playback.
If the ENTER button is pressed and held in for more than
two seconds when in the play or pause mode, playback
stops and the previous menu window reappears.
Finally, the list of Internet radio stations is displayed
and those that can be played are indicated by the “
∗
”
mark in front of them.
4
Press the ENTER or CURSOR
GG
button once
again.
• The latest list of radio stations is downloaded from
the vTuner site. (Several minutes are required for this
download.)
5
Press the CURSOR
DD
or
HH
button to select the
desired setting item, then press the
ENTER or
CURSOR
GG
button.
6
Press the CURSOR
DD
or
HH
button to select the
desired radio station, then press the
ENTER or
CURSOR
GG
button.
•Connection starts, and the station starts playing
once the buffer reaches “100%”.
FUNCTION
ENTER
MEMORY
CURSOR
3
Connecting to an Internet radio station for the
first time:
Press the
ENTER or CURSOR
GG
button.
• The update screen appears.