Filter
Top Products
66
Basic Operation
Manual tuning
1
Set the input source to “TUNER”.
2
Press the TU (TUNER)
button to select the TUNER
mode.
3
Watching the display, press the BAND button
to select the desired band (AM, FM or XM).
When listening to the XM satellite Radio ( page
71).
FUNCTION TUNING PRESET
MEMORY
ON SCREEN
(AMP mode)
CHANNEL
NUMBER
SHIFT
BAND
MODE
MEMORY
BLOCK
RDS SEARCH
TUNING
TUNER
(AMP mode)
TU
(Main unit)
(Remote control unit)
4
Press the MODE button to set the manual tuning
mode.
Check that the display’s “AUTO” indicator turns off.
5
Press the TUNING button to tune in the desired
station.
The frequency changes continuously when the button
is held in.
• When the manual tuning mode is set, FM stereo broadcasts
are received in monaural and the “STEREO” indicator turns
off.
Preset memory
1
Use the “Auto tuning” or “Manual tuning”
operation to tune in the station to be preset in
the memory.
2
Press the TU (TUNER)
button to select the TUNER
mode.
3
Press the MEMORY button.
4
Press the MEMORY BLOCK (A to G) button.
The memory block can also be selected by pressing
the SHIFT button.
5
Press the CHANNEL button or NUMBER (1 to
8) button to select the desired preset channel.
6
Press the MEMORY button again.
• Store the station in the preset memory.
•To preset other channels, repeat steps 2 to 5.
A total of 56 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to G.
(Remote control unit)
(Remote control unit
in the AMP mode)
BAND
TUNINGMEMORY
MODE