Denon AVR-5805CI Stereo System User Manual


 
PageDefault settingsZone Setup
155
Advanced Setup – Part 2
6. Zone Setup
1
2
Speaker
Configuration
This selects the subwoofer used in ZONE2 for playing the
low base sound.
6
Subwoofer
Mode
Set the presence/absence of speaker combinations and
the size in function of the low frequency reproduction
capabilities when playing surround sound in ZONE2.
LFE
ON
120
120
123, 124
This sets whether or not to use the video
conversion function.
Video
Convert
Mode
Set the delay time the sound is synchronized
with the picture which are output in ZONE2.
Audio
Delay
Video Setup
0 ms
7
Bass = 0 dB, Treble = 0 dB, HPF = OFF, L/R = 0 dB
124, 125
Zone3/4
Tone/
Ch.Level
Bass = 0 dB, Treble = 0 dB, HPF = OFF, L/R = 0 dB
Front Sp.
Small
Center Sp. Surround Sp.Subwoofer
Small SmallYes
3
This parameter is for optimizing the timing of the sound
produced from the various speakers and subwoofer
according to the listening position in ZONE2.
Delay Time
121
Front L & R Center Surround L & RSubwoofer
12.0 ft (3.6 m)
12.0 ft (3.6 m)
10.0 ft (3.0 m)
12.0 ft (3.6 m)
4
This adjusts the volume of the signal output from the
various speakers and subwoofer used in ZONE2.
Channel
Level
122, 123
Front L Front R Surround LCenter
0.0 dB 0.0 dB 0.0 dB0.0 dB
Surround R
0.0 dB
Subwoofer
0.0 dB
5
Set the frequency (in Hz) below which deep bass
appearing in the main channels will be routed to the
ZONE2 subwoofer.
Crossover
Frequency
80 Hz
123
Adjust the tone and channel level of the sound
output from ZONE3 and ZONE4.
Zone3
Zone4
PageDefault settingsAdvanced Playback
5. Advanced Playback
1
2
2ch
Direct/Stereo
Auto
Surround
Mode
Turn the audio compression on or off when down-mixing
Dolby Digital signals.
3
Dolby Digital
Setup
The speaker settings can be changed specifically for
playing in the 2 channel direct or stereo mode.
Set the Auto surround mode function.
Basic
OFF
Auto Surround Mode = ON
116
117
117
4
This parameter is for optimizing the Room EQ with which
the audio signals are produced from the speakers.
Manual EQ
Setup
All Channels and Frequency = 0 dB
118, 119