Filter
Top Products
146
Advanced Setup – Part 2
• Please set all THX Certified speakers to small and the
crossover to 80 Hz.
•We recommend using with the crossover frequency set to
“FIXED–THX–”, but depending on the speaker, setting it to a
different frequency may improve frequency response near
the crossover frequency.
• The crossover frequency mode is valid only when subwoofer
is set to “Yes”, and when one or more speakers are set to
SMALL, as described in section “Speaker Configuration”
settings ( page 140, 141).
1
Press the CURSOR
FF
or
GG
button to select
“Advanced” at the “Crossover Frequency”
screen.
2
Press the CURSOR
DD
or
HH
button to select the
speaker to be set.
• If “LFE–THX–” is selected at “Subwoofer Setup”, the
frequencies can only be selected for speakers set to “Small”
at “Speaker Configuration”.
• If “LFE+Main” is set at “Subwoofer Setup”, the frequencies
can be selected regardless of the speaker size setting.
Selecting the Surround Speakers for the
different surround modes
• Use this function when using multiple surround speaker
combinations for more ideal surround sound.
• Once the combinations of surround speakers to be used for
the different surround modes are preset, the surround
speakers are selected automatically according to the
surround mode.
1
Press the CURSOR
DD
or
HH
button to select
“Surround Sp Setup” at the “Speaker Setup”
menu, then press the
ENTER button.
• The “Surround Sp Setup” screen appears.
• If “LFE+Main” is set at “Subwoofer Setup”, “SW:LFE+Main”
( page 141, 142) is displayed at the top right of the screen.
3
Press the CURSOR
FF
or
GG
button to select the
frequency.
2
Setting the crossover frequency individually for
the different channels