Filter
Top Products
108
Advanced Setup – Part 1
Setting the IEEE1394 Auto Function
• Set whether or not to automatically play the IEEE1394
device when it is selected with the FUNCTION knob.
1
Press the CURSOR
DD
or
HH
button to select
“IEEE1394 Auto Func.” at the “Audio Input
Setup” menu, then press the
ENTER button.
• The “IEEE1394 Auto Func.” screen appears.
2
Press the CURSOR
FF
or
GG
button to select
“ON” or “OFF”.
3
Press the ENTER button to enter the setting.
• The “Audio Input Setup” menu reappears.
OFF:
Select this if you do not want to automatically play
the device.
ON:
Select this to automatically play the device.
In some cases settings may be required on your player.
Also refer to the player’s operating instructions.
Tuner Presets
2 Auto Preset Memory
• FM stations are received automatically and stored in the
memory.
1
Press the CURSOR
DD
or
HH
button to select
“Tuner Presets” at the “Audio Input Setup”
menu, then press the
ENTER button.
• The “Tuner Presets” screen appears.
2
Press the CURSOR
DD
or
HH
button to select
“Auto Preset Memory”, then press the
ENTER
button.
• Switch to the “Auto Preset Memory” screen.
3
Press the CURSOR
FF
button to select “Yes”.
• “Search” flashes on the screen and searching
begins.
• “Completed” appears once searching is completed.
• The display automatically switches to the “Tuner
Presets” screen.
• If an FM station cannot be preset automatically due to poor
reception, use the “Manual tuning” operation ( page 66)
to tune in the station, then preset it using the manual
“Preset memory” operation ( page 66).