Filter
Top Products
130
Advanced Setup – Part 1
4
Press the ENTER button to enter the setting.
• The “Option Setup” menu reappears.
1
Press the CURSOR
DD
or
HH
button to select
“Power Amp Assign” at the “Option Setup”
menu, then press the
ENTER button.
• The “Power Amp Assign” screen appears.
2
Press the CURSOR
FF
or
GG
button to select the
Amp Assign mode according to the speaker
system you want to achieve.
Normal:
This is the recommended amplifier assignment
mode. Normally select this when not conducting
the power amplifier assignment.
By default, this is set to “Normal”.
Advanced:
With this mode, the power amplifiers can be
assigned freely to the desired channels according
to the speaker system you are using.
Adv+Front B:
With this mode, the power amplifiers can be
assigned freely to the desired channels and front B.
The following modes can be selected when there
are power amplifiers that are free with respect to
the recommended amplifier assignment mode
(“Normal”).
+Zone2:
This mode is the setting of the status in which the
power amplifier is assigned to the ZONE2 output
channel.
+Zone3:
This mode is the setting of the status in which the
power amplifier is assigned to the ZONE3 output
channel.
+Zone4:
This mode is the setting of the status in which the
power amplifier is assigned to the ZONE4 output
channel.
+Zone2/3:
This mode is the setting of the status in which the
power amplifier is assigned simultaneously to the
ZONE2 and 3 output channels.
+Zone3/4:
This mode is the setting of the status in which the
power amplifier is assigned simultaneously to the
ZONE3 and 4 output channels.
+Zone2/4:
This mode is the setting of the status in which the
power amplifier is assigned simultaneously to the
ZONE2 and 4 output channels.
+Zone2/3/4:
This mode is the setting of the status in which the
power amplifier is assigned simultaneously to the
ZONE2, 3 and 4 output channels.
Bi-Amp+Front:
This mode is the setting for playing the front
channel with bi–amp connections.
Bi-Amp:
This mode is the setting for playing the front,
center and surround channels with bi–amp
connections.
• The amplifier assignment modes that can be selected differ
according to the channel settings made at “Channel Setup”
( page 126 ~ 128).
• The status in which power amplifiers are assigned to output
channels in the different amplifier assignment modes differs
according to the channel settings for the different zones
( page 131, 132).
• If the “Advanced” or “Adv+Front B” amplifier assignment
mode is selected, the channels to which power amplifiers
can be assigned differ according to the channel settings for
the different zones ( page 133).
3
When “Advanced” or “Adv+Front B” is
selected:
Press the
CURSOR
DD
or
HH
button to select the
power amplifier to be assigned, then press the
CURSOR
FF
or
GG
button to select which channel
to assigned the amplifier to.
When “Advanced” or “Adv+Front B” is selected, the
power amplifiers can be assigned freely to the desired
channels.