Filter
Top Products
153
Advanced Setup – Part 2
PageDefault settingsSpeaker Setup
PageDefault settingsAuto Setup / Room EQ
1. Auto Setup/Room EQ
1 Auto Setup
Room EQ
Setup
2
Direct Mode
Setup
4
Set the ON/OFF setting of Room EQ, in the case of the
surround mode is in Direct or Pure Direct.
3
Mic Input
Select
Set this to switch the Mic Input jack for use for Mic or
V.AUX L-channel input jack.
This unit performs an analysis of the speaker system and
measures the acoustic characteristics of your room to
permit an appropriate automatic setting.
Set the Room EQ setting with All or Assign for each
surround mode.
–
All, Room EQ = OFF
OFF
Mic
20 ~ 26
149
150
150, 151
System setup items and default values (set upon shipment from the factory)
2. Speaker Setup
1
3
Speaker
Configuration
Channel
Level
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE
for full-size, full-range) to automatically set the composition
of the signals output from the speakers and the frequency
response.
This adjusts the volume of the signals output from the
speakers and subwoofer for the different channels in order
to obtain optimum effects.
Front Sp.
Small
Center Sp.
Surround Sp.
A / B
Subwoofer
Small SmallYes
Front L & R Center
Surround
L & R (A)
Subwoofer
12.0 ft (3.6 m) 12.0 ft (3.6 m) 10.0 ft (3.0 m)12.0 ft (3.6 m)
Front L Front R Center
Surround
R (A)
Surround
Back L
Surround
Back R
Subwoofer
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
Surround Back Sp.
Small / 2spkrs
4
Delay Time
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and
subwoofer according to the listening position.
Surround
L & R (B)
10.0 ft (3.0 m)
Surround
L (A)
0 dB
Crossover
Frequency
Set the frequency (Hz) below which the bass sound of the
various speakers is to be output from the subwoofer.
5
FIXED —THX—
140, 141
2
Subwoofer
Setup
This selects the subwoofer for playing deep bass signals.
LFE —THX—
141, 142
142, 143
143 ~ 145
145, 146
Surround
Speaker
Setup
Use this function when using multiple
surround speaker combinations for more ideal
surround sound. Once the combinations of
surround speakers to be used for the different
surround modes are preset, the surround
speakers are selected automatically according
to the surround mode.
Surround
mode
Surround
speaker
THX/DOLBY/
DTS CINEMA
THX/DOLBY/
DTS MUSIC
WIDE
SCREEN
9 CH
STEREO
DSP
SIMULATION
MULTI CH
MODE
AAAA+B A+B A+B A
6
THX/
DOLBY GAME
146, 147
7
THX Audio
Setup
When using a THX Ultra2 compatible
subwoofer, set the subwoofer’s
frequency response.
THX Ultra2 Subwoofer = NO
Boundary Gain
Compensation
Surround Back
Speaker
Position
When using two surround back
speakers, set the distance of the two
speakers.
The Distance Between SBL/SBR = 0 ft to 1 ft (0 m to 0.3 m)
147
Surround
Back
10.0 ft (3.0 m)
Surround
R (B)
0 dB
Surround
L (B)
0 dB
148