Denon AVR-5805CI Stereo System User Manual


 
Specifications
174
2 Audio section
Power amplifier
Rated output: Front:
170 W + 170 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
200 W + 200 W (6 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
Center:
170 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
200 W (6 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
Surround (A, B):
170 W + 170 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
200 W + 200 W (6 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
Surround Back:
170 W + 170 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
200 W + 200 W (6 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
Dynamic power: 190 W x 2 ch (8 /ohms)
310 W x 2 ch (4 /ohms)
Output terminals: All channels 6 ~ 16 /ohms
Analog
Input sensitivity / input impedance: 200 mV / 47 k/kohms
Frequency response: 10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
S/N: 105 dB (DIRECT mode)
Distortion: 0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output: 1.2 V
•Digital
D/A output: Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.003 % (1 kHz, at 0 dB)
S/N ratio — 125 dB
Dynamic range — 117 dB
Digital input: Format — Digital audio interface
Phono equalizer (PHONO input — REC OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
S/N: 74 dB (A weighting, with 5 mV input)
Rated output / Maximum output: 150 mV / 8 V
Distortion factor: 0.03 % (1 kHz, 3 V)
2
Video section
Standard video terminals
Input / output level and impedance: 1 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB
S-Video terminals
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 /ohms
C (color) signal — 0.286 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB
Color component video terminal
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 /ohms
P
B/CB signal — 0.7 Vp-p, 75 /ohms
P
R/CR signal — 0.7 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 100 MHz — +0, –3 dB