Filter
Top Products
48 LED-PRO • User’s Guide
4. Operation
Using the Setup Menu
pçìêÅÉ=^äáÖåãÉåí=Ô=asf
From the Setup Menu (for a DVI input source), select Source Alignment to display the
DVI Source Alignment Menu. This menu enables you to adjust all aspects of the source’s
“visible” parameters.
Figure 4-18. DVI Source Alignment Menu (sample)
Following are descriptions of each DVI Source Alignment Menu function:
• Contrast
• Brightness
• Sharpness
• EDID DVI
`çåíê~ëí
From the DVI Source Alignment Menu, select Contrast to adjust the overall contrast of
the selected DVI input.
• The adjustment range is 75.0% to 125.0%.
• 100% is the default setting.
_êáÖÜíåÉëë
From the DVI Source Alignment Menu, select Brightness to adjust the overall brightness
of the selected SDI input.
• The adjustment range is 75.0% to 125.0%.
• 100% is the default setting.
pÜ~êéåÉëë
From the DVI Source Alignment Menu, select Sharpness to adjust the sharpness of the
selected input. This selection sets the scaler's sharpening (or softening) value.
• The sharpening range extends from -10 (softest) to +10 (sharpest).
• 0 is the default setting (which sets the scaler to its optimum sharpness).
bafa=asf
From the DVI Source Alignment Menu, select EDID DVI to display the EDID DVI In
Format Menu, which enables you to update LED-PRO's preferred EDID resolution. Refer
to the “Programming EDID
” section on page 53 for instructions.
SOURCE ALIGNMENT
> Contrast 100.0
Brightness 100.0
Sharpness +0
EDID DVI >>