Filter
Top Products
86 LED-PRO • User’s Guide
4. Operation
Using the Expert Mode Menu
içÖç
From the Expert Mode Menu, select Effects to display the Logo Menu, which enables
you to save and delete a LOGO. LED-PRO stores one logo in non-volatile memory.
Figure 4-69. Logo Menu
Following are descriptions of each menu function:
• Capture Logo
• Delete Logo
• Logo Present
`~éíìêÉ=içÖç
Scroll to the Capture Logo function and press SEL to save the current “active” image as
the LOGO.
Note that you can also capture a LOGO by pressing and hold the desired input button, then
pressing the LOGO button. In Chapter 2, refer to the “About the LOGO
” section on
page 14 for more information.
aÉäÉíÉ=içÖç
Scroll to the Delete Logo function and press SEL to delete the current LOGO from
memory. The front panel LOGO button will then display Internal Black when pressed.
içÖç=mêÉëÉåí
The Logo Present line indicates current LOGO status:
• Yes — an image is present in Logo memory.
• No — a logo is not present in memory. Internal black will be displayed.
LOGO
> Capture Logo n/a
Delete Logo n/a
Logo Present No
Tip
Use the Freeze function to capture a frame of video, then use
the Capture Logo function to save it. Refer to the “Freeze”
section on page 87 for details.
Note
The Capture Logo and Delete Logo functions are not
available (n/a) if the LOGO button is currently selected.