Filter
Top Products
46 LED-PRO • User’s Guide
4. Operation
Using the Setup Menu
pçìêÅÉ=^äáÖåãÉåí=Ô=paf
From the Setup Menu (for an SD-SDI or HD-SDI input source), select Source Alignment
to display the SDI Source Alignment Menu. This menu enables you to adjust all aspects
of the source’s “visible” parameters.
Figure 4-17. SDI Source Alignment Menu (sample)
Following are descriptions of each SDI Source Alignment Menu function:
• Contrast
• Brightness
• Hue
• Saturation
• Sharpness
• Clip to SubBlk
• Luma Tracking
• EDID DVI
`çåíê~ëí
From the SDI Source Alignment Menu, select Contrast to adjust the overall contrast of
the selected SDI input.
• The adjustment range is 75.0% to 125.0%.
• 100% is the default setting.
_êáÖÜíåÉëë
From the SDI Source Alignment Menu, select Brightness to adjust the overall brightness
of the selected SDI input.
• The adjustment range is 75.0% to 125.0%.
• 100% is the default setting.
eìÉ
From the SDI Source Alignment Menu, select Hue to adjust the hue of the selected input.
Note that Hue is not applicable for YPbPr inputs.
• The adjustment range (in degrees) is -180 to +180.
• 0 is the default setting.
SOURCE ALIGNMENT
> Contrast 100.0
Brightness 100.0
Hue +0
Saturation 100
Sharpness +0
Clip to SubBlk +0
Luma Tracking +0
EDID DVI >>