Filter
Top Products
HDMI UTPro NetLinx Programming
83
Instruction Manual – HDMI-UTPRO-0808
HDMI UTPro NetLinx Programming
Overview
The HDMI UTPro recognizes a select number of SEND_COMMANDs. Use NetLinx Studio (Version 3 or higher is
required) to send these commands to the HDMI UTPro.
Device Numbering
By default, the Device Number assigned to the HDMI UTPro is 05500 (in the WebConsole, the device’s number displays
as 5500). In NetLinx Studio’s Online Tree, the HDMI UTPro is listed as a device with three ports, and each
HDMI-UTPRO-RX Receiver connected to the HDMI UTPro is listed as a separate device immediately following the
HDMI UTPro (FIG. 56).
The HDMI UTPro’s three ports in the Online Tree are:
Port 1 – Used for SEND_COMMANDs for HDMI UTPro control and switching.
Port 2 – Standard NetLinx serial port connected to the LAN 10/100 (RJ-12) port; can be used with
SEND_STRINGs to output control strings to a connected device.
Port 3 – Reserved for future use.
FIG. 56 NetLinx Studio Online Tree - indicating HDMI UTPro and connected HDMI-UTPRO-RX Receivers
HDMI-UTPRO-RX Receiver
number auto-assigned to 05501
Ports 1-3 on HDMI-UTPRO-RX
(device number 05501)
Ports 1-3 on HDMI-UTPRO-RX
(device number 05502)
Ports 1-3 on HDMI-UTPRO-RX
HDMI UTPro with device
number assigned to 05500 (default)
HDMI-UTPRO-RX Receiver
number auto-assigned to 05502
HDMI-UTPRO-RX Receiver
number auto-assigned to 05503
(device number 05503)
HDMI-UTPRO-RX Receiver
number auto-assigned to 05504
Ports 1-3 on HDMI-UTPRO-RX
(device number 05504)
Ports 1-3 on HDMI-UTPRO-RX
(device number 05505)
Ports 1-3 on HDMI-UTPRO-RX
HDMI-UTPRO-RX Receiver
number auto-assigned to 05505
HDMI-UTPRO-RX Receiver
number auto-assigned to 05506
(device number 05506)
Ports 1-3 on HDMI-UTPRO-RX
(device number 05507)
Ports 1-3 on HDMI-UTPRO-RX
HDMI-UTPRO-RX Receiver
number auto-assigned to 05507
HDMI-UTPRO-RX Receiver
number auto-assigned to 05508
(device number 05508)
Ports 1-3 on HDMI UTPro