Filter
Top Products
HDMI UTPro WebConsole
70
Instruction Manual – HDMI-UTPRO-0808
Note: The serial number displays at the end of the product name in the Zero-Config tree.
Accessing the WebConsole
To access the WebConsole:
1.
From the NetLinx Studio Zero-Config tab – Double-click on “AMX-HDMI-UTPRO-0808” or right-click and
select one of the launch browser options.
The initial view is a display-only* view of the IP Settings page.
Or
In the Address Bar of your PC’s browser – Type the IP Address of the target HDMI UTPro and press Enter. The
PC must be on the same subnet (e.g., 192.168.X.X).
The initial view is a display-only* view of the IP Settings page.
If the IP Setting page does not open, see the “WebConsole Troubleshooting” section on page 80.
* Note that the IP Settings page is display-only, because you have not yet logged in. You must log in before making
changes to the IP Settings page and to access the other pages described in this section. To log in, click the Login button
in the upper right-hand corner.
FIG. 42 Zero-Config list showing network with HDMI-UTPRO-0808
Zero-Config tab
IP address for HDMI UTPro
HDMI UTPro
Caution: We strongly recommend that the WebConsole site be placed inside your network firewall and that
system security be turned on.
FIG. 43 IP Settings page