Filter
Top Products
Operating the Control Panel
46
Instruction Manual – HDMI-UTPRO-0808
Function Menu Overview and Options
The Function Menu is displayed on the control panel LCD screen and provides access to various control and setup
options for the HDMI UTPro (FIG. 33).
The modes that apply to the HDMI UTPro are Change, Disconnect, Status, Lock, and Global Preset. While in a mode,
the same type of operations can be performed, e.g., when in Status Mode you can select various inputs to check the status
on without having to repeatedly put the control panel into Status Mode.
This section provides an overview of the menus and modes. Detailed information and instructions on the individual
modes are provided in the remainder of the chapter.
Use the Control Dial and Select Key to navigate the Function menu, submenus, and lists. The menus are loop menus
(each menu returns to the first item after you scroll past the last item).
Function Menu Options
The Function menu (FIG. 34) and its submenus access the different modes and lists used to control the
system.
FIG. 33 Function Menu displayed on the control panel LCD screen
FIG. 34 Function menu options
Function Menu displayed Use the Control Dial to
scroll through the options
in the Function Menu
Use the Select Key to
on LCD screenselect options in the
Function Menu
Adjust Audio does not apply to the operation
of the HDMI UTPro
Local presets must be created in XNConnect
before this option appears