Filter
Top Products
Overview and General Specifications
11
Instruction Manual – HDMI-UTPRO-0808
Overview and General Specifications
Applicability Notice
The information in this manual applies to the HDMI-UTPRO-0808, Twisted Pair Dist Kit (FG1047-88K).
HDMI-UTPRO-0808, Twisted Pair Distribution Kit (FG1047-88K)
The HDMI-UTPRO-0808, Twisted Pair Distribution Kit contains the following items:
Note: The HDMI UTPro 8x8 Matrix Switcher (FG1047-88) and the Receivers with power supplies
(FG1403-20) can also be ordered separately.
Product Notes
The HDMI UTPro 8x8 Matrix Switcher is used in conjunction with HDMI UTPro Receivers for sending HDMI over
long distances on UTP cable.
HDMI UTPro Features
True 8x8 HDMI matrix switching, allowing any input to be switched to any or all outputs
Incorporates HDMI
®
technology
HDCP 1.3 compatible
AMX HDCP InstaGate
®
Technology significantly reduces the HDCP latency and interruptions of protected
content on all displays in the system
Native NetLinx
®
device
AMX Device Discovery enabled through AMX’s AutoPatch Duet module.
Supports computer video up to 1920x1200
Supports HDTV up to 1080p
Pre-loaded with the most common EDID settings to ensure proper functionality with source devices
Features the AMX EDID Programmer allowing specific display EDID settings to be custom loaded on each
input
Global presets and local presets
TCP/IP (LAN 10/100) port
RJ-12 (Serial) port
RS-232 serial (Control) port
IR Control (optional) via the HDMI-UTPRO-RX Receiver
Rack mounting ears included
Backed by AMX’s 3 year warranty (see warranty at www.amx.com)
HDMI UTPro Control Features
The HDMI UTPro supports two main protocols: TCP/IP and XNNet (protocol used by control panel). Several control
options are available. Multiple control methods can be used on the same system.
Native NetLinx interface
Front mounted control panel standard (with security lockout)
AMX Control Devices – for control programming information, see the instruction manual for the specific
interface
Supports third-party controllers over the Control (DB-9 serial) port (note that this port cannot provide the
additional NetLinx functionality which is available through the LAN 10/100 port)
Note: Features and specifications described in this document are subject to change without notice.
Part Quantity Part #
HDMI-UTPRO-0808 (8x8 HDMI Matrix Switcher, UTP Distribution)
(includes 8 HDMI patch cables)
1 FG1047-88
KIT, (8) HDMI-UTPRO-RX with power supplies 1 KA1403-155