JBL CVPD50 Home Theater System User Manual


 
112
Outputs:
Composite (CVBS) V
ideo: Rear Panel: 2
S-Video (Y/C): Rear Panel: 2
Component (Y/Pb/Pr or YUV):
Rear Panel: 1 (Monitor Out)
Analog Audio L/R: Rear Panel: 2
Digital Audio Coaxial: Rear Panel: 1
Digital Audio Optical: Front Panel: 1, Rear Panel: 1
Headphone:
Front Panel: 1
LFE/Subwoofer: Rear Panel: 1
Speaker Level Outputs:
7 pairs (Rear Panel)
IR: Rear Panel: 1
Audio Section:
Amplifier Type Advanced PWM
Two Channel Stereo Mode: 100 Watts per channel continuous RMS power into CVSAT50 speakers,
90Hz to 20kHz, @<0.15%
Five and Seven Channel Cinema Modes: 100 Watts per channel continuous RMS power into CVSAT50 and CVCEN50 speakers,
90Hz to 20kHz, @<0.15%
Input Sensitivity/Impedance: 200mV/47k ohms
Signal-to-Noise Ratio: 97dBA
FM Tuner Section:
Frequency Range: 87.5 – 108MHz
Usable Sensitivity: IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio (Mono/Stereo): 70/68dB
Distortion (Mono/Stereo): 0.2/0.3%
Stereo Separation: 40dB @ 1kHz
Selectivity: +/–400kHz, 70dB
Image Rejection: 80dB
IF Rejection: 90dB
AM Tuner Section:
Frequency Range: 520–1720kHz
Signal-to-Noise Ratio: 45dB
Usable Sensitivity:
Loop 500µV
Distortion: 1kHz, 50% modulation, 0.8%
Selectivity: +/–10kHz, 30dB
Video Section:
Television Format: NTSC
Input Level/Impedance: 1V p-p/75 ohms
Output Level/Impedance: 1V p-p/75 ohms
Video Frequency Response:
Composite and S-video:
10Hz – 8MHz (–3dB)
Component video: 10Hz – 100MHz (–3dB)
General:
Power requirement: 120V AC, 60Hz
Power Consumption:
320W maximum, 78W idle, 10W standby
Dimensions (W x H x D): 17-3/8" x 6-3/5" x 17-3/4" (441mm x 168mm x 451mm)
Net Weight: 24 lb (11kg)
CVR700 OM 12/17/04 4:25 PM Page 112