Filter
Top Products
SMV 3000 Transmitter User’s Manual 1/9968
6.9 FlowConf Configuration - PV4
Engineering Units
The FlowConf tab card displays the Low Range Value (LRV), Low Range
Limit (LRL), Upper Range Value (URV) and Upper Range Limit (URL) for
PV4 in the unit of measure selected in the Engineering Units field.
PV4 Engineering Units
Select one of the preprogrammed engineering units for display of the PV4
measurements, depending upon type of flow measurement configuration.
Table 16 lists the pre-programmed engineering units for volumetric flow
and Table 17 lists the engineering units for mass flow.
Table 16 Pre-programmed Volumetric Flow Engineering Units for PV4
Engineering Unit Meaning
M
3
/h
d
gal/h
l/h
cc/h
m
3
/min
gal/min
l/min
cc/min
m
3
/day
gal/day
Kgal/day
bbl/day
m
3
/sec
CFM *
CFH *
Cubic Meters per Hour
Gallons per Hour
Liters per Hour
Cubic Centimeters per Hour
Cubic Meters per Minute
Gallons per Minute
Liters per Minute
Cubic Centimeters per Minute
Cubic Meters per Day
Gallons per Day
Kilogallons per Day
Barrels per Day
Cubic Meters per Second
Cubic Feet per Minute
Cubic Feet per Hour
d
Factory setting.
* The SCT 3000 will not display SCFM, SCFH, ACFM or ACFH. However you can
configure the SMV 3000 to calculate and display the volumetric flowrate at standard
conditions (CFM or CFH) by choosing standard volume in the Flow Compensation
Wizard. Likewise, you can choose actual volume for applications when you want to
calculate volumetric flowrate at actual conditions.
Continued on next page