Filter
Top Products
1/99 SMV 3000 Transmitter User’s Manual 11
Section 2 Quick Start Reference
2.1 Introduction
Section Contents
This section includes these topics
Topic See Page
2.1 Introduction ............................................................................13
2.2 Getting SMV 3000 Transmitter On-Line Quickly.....................14
About this section
This section provides a list of typical start-up tasks and tells you where
you can find detailed information about performing the task.
This section assumes that the SMV 3000 transmitter has been installed
and wired correctly, and is ready to be put into operation. It also assumes
that you are somewhat familiar with using the SCT and that the transmitter
has been configured correctly for your application. If the transmitter has
not been installed and wired, you are not familiar with SCT operation,
and/or you do not know if the transmitter is configured correctly, please
read the other sections of this manual or refer to the SCT 3000 Smartline
Configuration Toolkit Start-up and Installation Manual (34-ST-10-08)
before starting up your transmitter.