Filter
Top Products
1/99 SMV 3000 Transmitter User’s Manual 1
Section 1 Overview - First Time Users Only
1.1 Introduction
Section Contents
This section includes these topics.
Topic See Page
1.1 Introduction ..............................................................................1
1.2 CE Conformity (Europe)...........................................................3
1.3 SMV 3000 Smart Multivariable Transmitters ............................4
1.4 Smartline Configuration Toolkit (SCT 3000) .............................7
1.5 Smart Field Communicator (SFC) ............................................8
1.6 Transmitter Order...................................................................11
About This Section
This section is intended for users who have never worked with our
SMV 3000 Smart Multivariable Transmitter and the SCT 3000 Smartline
Configuration Toolkit before. It provides some general information to
acquaint you with the SMV 3000 transmitter and the SCT 3000.
ATTENTION
To be sure that you have the SCT software version that is compatible with
your SMV 3000, please note the following table.
If your SMV 3000 contains
software
version . . .
Then use this compatible
SCT software version . . .
* Compatible TDC
STIMV IOP module
1.1 through 1.5 3.06.00
2.1 3.11.2 5.3
2.5 or 3.1 3.12.3
2.5, 3.1 or 4.0 4.02.013a
STIMV IOP Module
Revision Level
* If the SMV 3000 will be integrated with our TPS/TDC control systems,
you must have an STIMV IOP module in your Process Manager,
Advanced Process Manager, or High Performance Process Manager.
The STIMV IOP module must be at least revision level 5.3 or greater to
be compatible with the SMV 3000. Contact your Honeywell
representative for information on upgrading an STIMV IOP.