Furuno RC-1500-1T Stereo System User Manual


 
4-22
11. Press the [ENT] key to open the DSC FREQ menu.
12M-INTL
GO TO ALL VIEW
***
Send message
***
CALL TYPE:
AREA:
PRIORITY
COM. TYPE
COM. FREQ
Individual
001234567
: Routine
: Telephone
: No infor
6 MHZ
8 MHZ
12 MHZ
4 MHZ
2 MHZ
DSC FREQ : TL
16 MHZ
18 MHZ
22 MHZ
25 MHZ
OTHER
MANUAL
Use to scroll
menu.
OTHER: Special, private channels.
MANUAL: For selection of frequency at
radiotelephone when there is "remote control
error."
12. Select DSC band and press the [ENT] key. Select DSC frequency and press the [ENT] key.
(See page 4-8 for details.) Your display should now look something like one below.
***
Send message
***
CALL TYPE : AREA CALL
AREA :
12˚N 123˚W 12˚ 12˚
PRIORITY : ROUTINE
COM. TYPE : TELEPHONE
COM. FREQ :
2164.0 KHZ
DSC FREQ : 2177.0 KHZ
GO TO ALL VIEW
13. Press the [CALL] key to send the geographical area call (transmission time: about 7 sec.).
The display shows "Geographical area call in progress!" while the call is being sent.
AREA:
12˚N 123˚W 12˚ 12˚
Geographical area
call in progress!
TIME TO GO : 7S
DSC FREQ :
2177.0 KHZ
TELEPHONE
2164.0 KHZ
ROUTINE
14. After the call is sent (timer counts down to zero), the DSC standby screen automatically
appears. You can now communicate with other party.