Furuno RC-1500-1T Stereo System User Manual


 
5-1
5. LOG FILE
The log file stores routine received messages (messages other than Distress), received distress
messages and transmitted messages, each in its own separate log.
5.1 Log File Description
Three memory banks are provided for storage of messages: received ordinary log, received
distress log and transmitted log. Each memory bank stores 50 messages, on a first-in, first-out
basis. This means that a latest message is saved as log no.1 and the log no. of all previous
messages in that memory bank increments by one. When the storage capacity is exceeded the
oldest message is deleted to make room for the latest. An asterisk (*) marks unread or
unacknowledged Rx messages, unacknowledged Tx messages and unread distress messages.
Received distress messages are automatically deleted 48 hours after being read.
5.2 Opening a Log File
5.2.1 Distress log
1. Press the [0/LOG] key to open the Log file menu.
8436.5
35˚00.000N 135˚00.000E 23:59
WATCH KEEPING
21
168
DIST
ROUT
21
16903.0 12657.0
VOLUME
Select log file
RECEIVED ORDINARY
RECEIVED DISTRESS
TRANSMITTED
22
2. Select RECEIVED DISTRESS and press the [ENT] key. Use
or
to scroll the log as
desired. To print all received distress messages, press the [8/PRINT] key.
Scroll with
or .
*
Rcvd distress log
*
02.JUL-23-19:56 DISTRESS
03.JUL-23-13:45
*
RELAY ALL
04.JUL-23-11:52 RELAY AREA
05.JUL-23-11:43 RELAY GRP
06.JUL-22-21:18 RELAY INDV
01.JUL-23-19:58 ACKNOWLED
*
Rcvd distress log
*
46.JUN-29-19:56
*
RELAY ALL
47.JUN-29-19:48
*
DISTRESS
48.JUN-29-19:44
*
DISTRESS
49.JUN-26-12:36
*
ACKNOWLED
45.JUL-01-23:45
*
RELAY ALL
50.JUN-26-12:34
*
DISTRESS
OLD NEW DELETE
OLD NEW DELETE
3. To view a file, select it and press the [ENT] key. To print file, display it and press the
[8/PRINT] key. To return to the distress log, press the [CANCEL] key.