Furuno RC-1500-1T Stereo System User Manual


 
4-17
4.3 Group Call
A group call is for calling a specific group by entering its group ID.
4.3.1 Sending a group call
1. Press the [CALL] key at the DSC standby screen, and press the [ENT] key to open the CALL
TYPE menu.
***
Send message
***
RELAY SEL
POLLING
NEUTRAL
MEDICAL
RELAY ALL
DISTRESS
GROUP ID
PRIORITY
COM. TYPE
COM. FREQ
DSC FREQ
: Individual
PSTN CALL
TEST CALL
ALL SHIPS
GROUP CALL
AREA CALL
POSITION
INDIVIDUAL
CALL TYPE
If this part of the menu appears
use to scroll the menu.
2. Use
or
to select GROUP CALL and press the [ENT] key.
3. Press the [ENT] key to open the GROUP ID menu.
GO TO ALL VIEW
***
Send message
***
CALL TYPE
PRIORITY
COM. TYPE
COM. FREQ
DSC FREQ
: GROUP CALL
: ROUTINE
: TELEPHONE
: NO INFO
: 2M-INTL
GROUP ID 000000000
How to input group ID automatically
If you have registered some group IDs (see page 6-4),
you can insert them into your message as follows:
1. Press the [FILE] key after completing step 2 in the
above procedure. The following display appears.
2. Select file which contains ID you want to use
(press
to show ID number).
3. Press the [ENT] key to insert ID number in message.
Group ID file
004. FURUNO
500. MARINE
777. ELECTRIC
Note: You can print the
Group ID file list by pressing
the [8/PRINT] key.
UP DOWN
4. Key in group ID (nine digits) where to send the message and press the [ENT] key.
5. Press the [ENT] key to open the PRIORITY menu.
GO TO ALL VIEW
***
Send message
***
CALL TYPE
GROUP ID
COM. TYPE
COM. FREQ NO INFO
DSC FREQ
: GROUP CALL
: 012345678
: 2M-INTL
PRIORITY
SAFETY
URGENCY
ROUTINE
6. Select priority desired and press the [ENT] key.