Furuno RC-1500-1T Stereo System User Manual


 
4-19
Inserting the destinations of a fax terminal
You can send a text message to a Group 3 type fax terminal which is
connected to the international PSTN (telephone) land line, provided
the LES selected supports fax delivery.
1. Prepare message. (To send stored file, close any open files.)
2. Press [F3] to display the Transmit menu.
3. Press [1] to select Transmit Message.
The cursor is on the Priority line and “Normal” is selected.
4. Press [
] to advance the cursor to the Message file line.
5. The message file line displays “Message now begin edited.” when
a file is the currently displayed. To send a file stored on a floppy
disk, select the file from the file list.
6. Press [ ] to advance the cursor to the Destination Type line.
7. Press [Enter] to open the selection window.
8. Select “FAX”.
9. Press [Enter] to close the selection window.
Figure 4-27 Transmit message menu, FAX selected
10.Press [ ] to advance the cursor. The cursor is now on the Coun-
try/Ocean Code line.
11. Press [Enter] to open the window for country/ocean code entry.
12.Key in international telephone code of recipient. A list of interna-
tional telex/telephone country codes begins on page A-1 in the
Appendix.
13.Press [Enter] to close the window.
14.Press [ ] to send the cursor to the Station ID line.
15.Press [Enter] to open the window for station ID entry.
16.Enter facsimile number.