Filter
Top Products
4-15
4. Select ABLE and press the [ENT] key. The display changes as below. (IF ABLE is sent,
working frequency is automatically set specified by other party.)
***
Send message
***
DSC FREQ:
12577.5 KHZ
GO TO ALL VIEW
TO COAST: 121234567
COM. TYPE: TELEPHONE
COM. FREQ: CH12034
CALL TYPE: ABLE
ACKNOWLEDGEMENT
5. Press the [CALL] key to send the call, and the display changes as below.
Able acknowledge
call in progress!
TIME TO GO: 7S
DSC FREQ : 12577.5
KHZ
TO COAST :
121234567
ROUTINE
TELEPHONE CH 12034
6. After the call is sent (transmission time: 7 sec.), you can begin voice communications as
soon as the message is completely transmitted.)
Manually acknowledging individual call with “UNABLE”
1. When an individual call is received the alarm sounds and the display shows the message
"Individual request call received."
Individual request
call received.
FROM SHIP:
121234567
ROUTINE
TELEPHONE CH 12034
STOP ALARM
2. Press the [CANCEL] key to silence the alarm, and the display changes as below.
JUL-23-1999-23:00:00 ECC: OK
INDIVIDUAL REQUEST
FROM SHIP:
121234567
ROUTINE
TELEPHONE CH 12034
*
Received message
*
ANSWER ALL VIEW
3. Press
to select ANSWER and press the [ENT] key.