Furuno RC-1500-1T Stereo System User Manual


 
2-17
Setup
Configuration
NCS Channel List
No
AOR (WEST)
FREQ
11080*
ID
044
0
0
0
0
0
0
0
1
2
3
4
5
6
7
8
ENT: set ESC: quit
AOR (EAST)
FREQ
12580*
ID
144
1
1
1
1
1
1
1
POR
FREQ
12580*
ID
244
2
2
2
2
2
2
2
IOR
FREQ
10840*
ID
344
3
3
3
3
3
3
3
Figure 2-30 NCS channel list
4. Current NCS common channels are marked with an asterisk. These
channels cannot be changed.
5. Place the cursor where there is no data entered.
6. Press [Enter] to open the text window.
7. Enter NCS channel ID number.
8. Press [Enter] to close the text window.
9. With [
/
] advance the cursor to the frequency column.
10. Press [Enter] to open the text window.
11. Enter NCS channel frequency code.
12. Press [Enter] to close the text window.
13. Press [Esc] to open the update window.
Setup
Configuration
NCS Channel List
No
AOR (WEST)
FREQ
11080*
ID
044
0
0
0
0
0
0
0
1
2
3
4
5
6
7
8
ENT: set ESC: quit
AOR (EAST)
FREQ
12580*
ID
144
1
1
1
1
1
1
1
POR
FREQ
12580*
ID
244
2
2
2
2
2
2
2
IOR
FREQ
10840*
ID
344
3
3
3
3
3
3
3
Update
Yes No
Yes
Figure 2-31 NCS channel list, update window
14. Press [Enter] to register input.
Note: The ID number range is 45-63 and the frequency code range
is 8000-14000. Any ID or frequency entered which is out of
those range will display "Input Error: NCS ID" (for in-
valid ID) or "Input Error: Channel No." (For invalid fre-
quency). Clear the error message by pressing the [Esc] key.
Place the cursor at the invalid ID or frequency code. Then,
press the [Enter] key and enter correct ID or frequency.
15. Press [Esc].