Filter
Top Products
4-18
7. Press the [ENT] key to open the COM. TYPE menu.
GO TO ALL VIEW
***
Send message
***
CALL TYPE
GROUP ID
PRIORITY
COM. FREQ
DSC FREQ
: GROUP CALL
: 012345678
: Routine
: Telephone
: No infor
: 2M-INTL
NBDP-FEC
SPECIAL
TELEPHONE
COM. TYPE
TTY RCV
TTY
MORSE KEY
MORSE TAPE
FACSIMILE
MAIN
For Routine
Use to
scroll menu.
TELEPHONE
NBDP-FEC
For Safety or Urgency
8. Select communication type desired and press the [ENT] key.
9. Press the [ENT] key to open the COM. FREQ menu.
***
Send message
***
CALL TYPE : GROUP
COM. FREQ :
2164.0 kHz
COM. TYPE : TELEPHONE
PRIORITY : ROUTINE
GROUP ID :
012345678
DSC FREQ : 2M-INTL
GO TO ALL VIEW
FREQUENCY
CHANNEL
NO INFO
GO TO ALL VIEW
To select a user channel
If you have previously registered user channels (see page 7-10),
you can insert one into your message as follows:
1. Press the [FILE] key after completing step 8 in the
above procedure. The following display appears.
2. Select file and press the [ENT] key to insert channel no.
in message.
User channel file
00201. TX: 2301.0 RX: 2701.0
00202. TX: 2302.0 RX: 2702.0
00301. TX: 3301.0 RX: 3701.0
00302. TX: 3302.0 TX: 3702.0
Note: You can print the
User channel file list by pressing
the [8/PRINT] key.
UP DOWN
10. Select communication frequency desired and press the [ENT] key. (See page 4-6 for details.)
11. Press the [ENT] key to open the DSC FREQ menu.
GO TO ALL VIEW
***
Send message
***
CALL TYPE
GROUP ID
PRIORITY
COM. TYPE
COM. FREQ
: Individual
: 001234567
: Routine
: Telephone
: No infor
CALL
E
ONE
DSC FREQ
:
12M-INTL
6 MHZ
8 MHZ
12 MHZ
4 MHZ
2 MHZ
16 MHZ
18 MHZ
22 MHZ
25 MHZ
OTHER
MANUAL
Use to scroll
menu.
OTHER: Special, private channels.
MANUAL: For selection of frequency at
radiotelephone when there is "remote control
error."
12. Select DSC band and then press the [ENT] key. Select DSC frequency and press the [ENT]
key. (See page 4-8 for details.)