Furuno RC-1500-1T Stereo System User Manual


 
4-2
4.2 Saving a File
Before you can save a file to a floppy disk, the disk must be for-
matted. 2HD Type is only available.
Formatting Floppy Disks
1. Press function key [F1].
2. Press the [0] key to select "Floppy Disk Format".
3. Press the [] key to select "YES".
4. Press the [Enter] key.
5. Insert a new floppy disk and press the [Enter] key.
Saving a File
1. Press function key [F1] to display the File menu.
2. Press the [3] key. The screen should look something like Fig-
ure 4-2.
Save file ?
( UNTITLED1 )
Close Text
Yes
No
Figure 4-2 Close text screen
3. Press the [Enter] key. Enter file name, using up to eight charac-
ters.
You may use any alphabet or numeric on the keyboard. But
you may not use the following punctuation symbols;
| : " > < ;
!
You may add an extension at the end of the file name, for ex-
ample, .TXT, to distinguish text file from macro file.
4. Press the [Enter] key.
Note: When the working area is full, the message "File can't open"
appears. Then, you would close a file to clear a working area in
order to open the file desired.