Filter
Top Products
4-28
Display send message log or receive message log
You can display send message log or receive message log as follow.
1. Press [F6].
2. Press [1] (Send message log) or [2] (Receive message log).
3. Press [Esc] to escape.
EGC Messages
EGC messages are automatically received, printed and saved to the
DTE. The memory capacity for EGC message is 32k bytes. When the
memory is full, the oldest information is deleted.
Displaying and reprinting EGC messages
1. Press [F6].
2. Press [3]. The Display EGC Message screen appears.
Figure 4-39 Sample Display EGC Message screen
3. To scroll the message, use the up and down arrow keys.
4. To view next and previous messages, use the [N] and [P] keys.
5. To print the message appearing on the display, press and hold
down [Ctrl] and press [P]. To stop printing, press [Esc].
EGC messages can be automatically saved on a floppy disk. See page
4-24 for details.